Home Current News News Archive Shop/Advertise Ridecamp Classified Events Learn/AERC
Endurance.Net Home Ridecamp Archives
ridecamp@endurance.net
[Archives Index]   [Date Index]   [Thread Index]   [Author Index]   [Subject Index]

[RC] Hay Rack - Rebecca Hackworth

Don't laugh, I made my own.  It is made out of 1/2"id ( that is
inside diameter) galvanized pipe and something I found on-line.  It
is a joint that you don't have to thread the pipe.  It uses a hex key
to tighten.  I made it 4'x6' and holds 3 or 6 bales (lg 3 wire bales)
perfectly.  The joints are from "www.keeklamp.com" .  They will have
anything you need to put it together.  

This cost me $300 and a couple of hours vs $1000+ to get one at the
trailer shops.

Welding fabricators were as much $$

I can send pictures to anyone interested.

Has held up to XP04 and now several other trips as well.


Becky and the gang


=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Ridecamp is a service of Endurance Net, http://www.endurance.net.
Information, Policy, Disclaimer: http://www.endurance.net/Ridecamp
Subscribe/Unsubscribe http://www.endurance.net/ridecamp/logon.asp

Ride Long and Ride Safe!!

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-