Re: RC: EZ ride replacement stirrups

[Jim Holland <lanconn@tds.net>]

Randi...

I've done that. Just  scrape off the old ones, put on the old ones using
contact cement, available from any hardware store like Lowes, Home
Depot, Ace, etc.

Don't matter about cutting them off...but the "hangover" serves no
useful purpose.  I would trim it off.

Jim, Sun of Dimanche, and Mahada Magic

> Randi Lavikoff wrote:
> 
> I bought the replacement pads from EZ ride stirrups to put on the
> nylon type stirrups on my DeSoto saddle. Now I'm unsure what to use to
> glue them on so they won't fall off during my ride next week at
> Goethe. Anyone done this or know how? Also, since these stirrups are
> about 1/2-3/4" less wide, should I cut them to fit exactly, or leave
> an overhang (as they're so thick), or would this tear the pads off?
> Thanks for any suggestions. Time is running out. Thanks, Randi in
> Brooksville, Florida

-- 
Richard T. "Jim" Holland
Three Creeks Farm
175 Hells Hollow Drive
Blue Ridge, GA 30513
(706) 258-2830
FAX (706) 632-1271