ridecamp@endurance.net: Re: [endurance] HRM Electrode Tip

Re: [endurance] HRM Electrode Tip

VMAXEPT@aol.com
Wed, 24 Apr 1996 02:17:54 -0400

Messages sorted by: [ date ][ thread ][ subject ][ author ]
Next message: SSolis: "Re: [endurance] RE: [Endurance] Riding"
Previous message: VMAXEPT@aol.com: "Re: [endurance] Feed/heart"
Maybe in reply to: IDJ3Q.TVA.GOV/DD=IDJ3Q.TVA.GOV@mhs-tva.attmail.com: "[endurance] HRM Electrode Tip"

Dave
Neopreme girth electrode attachament.. alternate solution.
Get some *MOLESKIN* used in shoes ata drug store, clean the girth with
alcohol at the electrode site, peel the back off the moleskin..stick to the
girth. works great the electode attaches to the moleskin.

Tech Note; Loop the long lead around the girth one time. will take the stain
off the lead and reduce the pin unplug issue. The new electrodes we have fit
tighter.
Also the OLD electrodes 'swell' up with use and the hole gets larger, thus
the pin pulls out. Soak the electode in acetone run the pin in anout of the
electode a few times. The pin will fit tighter now.

Roger R
VMAXEPT@aol.com

Next message: SSolis: "Re: [endurance] RE: [Endurance] Riding"
Previous message: VMAXEPT@aol.com: "Re: [endurance] Feed/heart"
Maybe in reply to: IDJ3Q.TVA.GOV/DD=IDJ3Q.TVA.GOV@mhs-tva.attmail.com: "[endurance] HRM Electrode Tip"